Hello_worldESP-IDFVersion < IoT_Course

---+ The ESP-IDF version

The esp-idf version of hello world is almost identical to the Arduino version except the way it built.

We must first tell the idf.py that we are using an !ESP32S3 chip:

<verbatim>idf.py set-target esp32s3</verbatim>

After that we may have to clean previous builds:

<verbatim>idf.py fullclean</verbatim>

and finally we can build the hello_world program:

<verbatim>idf.py build</verbatim>

Once the program is built we can flash it and connect the serial monitor to see the results:

<verbatim>idf.py flash monitor</verbatim>

The program repeatedly runs the induction for 20 angle values between 0 and 2&Pi;. These values can easily be captured by redirecting the output to a file. I then used an editor to prepare the data to be plotted with gnuplot.

<verbatim>idf.py flash monitor | tee results.txt</verbatim>

Finally I wrote a simple Python program calculating the correct 20 sine values, which allows to compare them to the results from TinyML.

<img alt="results_.png" height="481" src="%ATTACHURL%/results_.png" title="results_.png" width="631" />

-- %USERSIG{UliRaich - 2023-12-18}%

---++ Comments

%COMMENT%

Attachments

Topic attachments
I	Attachment	History	Action	Size	Date	Who	Comment
png	results_.png	r1	manage	24.2 K	2023-12-18 - 17:13	UliRaich

This topic: IoT_Course_English > WebHome > TinyML > TheHelloWorld > Hello_worldESP-IDFVersion
Topic revision: r1 - 2023-12-18 - UliRaich