Recent Changes in UCC_Course_2018 Web retrieved at 14:11 (GMT)

Exercise 10: The LCD Display Goal: The main goal of this exercise is to prepare for an exercises on Analogue to Digital Conversion (ADC). In the ADC exercise we will...
Very often embedded systems do not have a keyboard, mouse and screen attached to them but they must live with more rudimentary (and much cheaper) input/output devices...
Solutions to the exercises This is the page to which the solutions will be uploaded. These will mainly consist of gzipped tar files which you can download and unpack...
Digital to Analogue Conversion: the mcp4275 Lecture 9 CSC321: Embedded Systems First Semester 2018/2019 Analogue versus digital Up to now we only treated digital...
Stepping Motors Lecture 9 CSC 321: Embedded Sysytem First Semeter 2018/2019 The 27BJY 48 stepper motor and its ULN 2803 driver module A lecture on youtube There...
Accessing the Real World CSC321: Embedded Systems First Semester 2018/2019 Accessing Libraries The Raspberry Pi flat cable connector and the cobbler bread board...
Lecture Slides This page contains all the lecture slides: For more information please contact: iamensah #64;ucc.edu.gh or uli.raich #64;gmail.com Lecture 1: Introduction...
Exercises 4 The Raspberry Pi Goal: The Raspberry Pi in contrast to the PC uses and ARM processor and peripherals are not included in the system but are connected...
The Raspberry Pi CSC321: Embedded SystemsFirst Semester 2018/2019 Versions There are several versions of Raspberry Pis available on the market: The first generation...
Title This is smart Home. Comments
The Web is dedicated to the 2018 version of the Course on Embedded Systems at the University of Cape Coast, Ghana. The course was developed and held in 2017 for...
New sensors In 2018 some drivers have been developed needed to use sensors that we did not have to time to experiment with in 2017: bmp280 the successor of...
Solutions to the examination on the MMA8452 accelerometer Exercise 1: Your smart phone almost certainly uses an accelerometer to detect if you hold it horizontally...
Solutions to the programming exercises Hello World When learning C almost everybody comes across a program called `Hello World`. This is the most simple C program...
Examination on the MMA8452 accelerometer Introduction The mma8452 accelerometer is a 3 axis electro mechanical device measuring acceleration on the X,Y,Z axis. Control...
Exercise List Here is a list of exercises to be solved during the course. We first play on the Linux system installed on the Lab PCs, then we write a few simple C...
The 2 Line LCD Display and its HD44780 Controller Lecture 10 CSC321: Embedded Systems First Semester 2018/2019 Why a simple 2 line display? Often embedded systems...
The 2 Line LCD Display and its HD44780 Controller Lecture 10 CSC321: Embedded Systems First Semester 2018/2019 Why a simple 2 line display? Often embedded systems...
The MCP4725 Digital to Analogue converter Exercise 1: Once the Digital to Analogue Converter (DAC) is correctly connected to the Raspberry Pi I2C interface the i2cdetect...
The mcp4725 Digital to Analogue Converter Goal: The digital to analogue converter is a device very often used in control applications. Some HV power supplies are...
Digital to Analogue Conversion: the mcp4275 Lecture 9 CSC321: Embedded Systems First Semester 2018/2019 Analogue versus digital Up to now we only treated digital...
Solutions to exercise 5: Accessing the real world Exercise 5.2: The gpio command The gpio command has many options of which mode write blink are...
Solutions to Exercise 7: Stepping motors Exercise 7.2 7.3: The different stepping modes The solutions to this exercise are very similar to the solution to the traffic...
Solutions to exercise 6: The DHT 11 temperature and humidity sensor Exercise 6.0 Using the library This is of course the easiest way to access the DHT11 because all...
Solutions to the assignment on Buzzer and RGB LED The RGB LED The RGB LED consists in fact of 3 tiny LEDs in the basic colors red, green and blue. In the solution...
Assignment: Buzzer and RGB LED: Exercise 1 Write a program for the active buzzer to buzz using the skeleton below. define pin number int main(void){ initialize wiringPi...
Precision Farming Abstract Monitoring plant and soil conditions may seem to be a simple use case but it can lead to a fantastic return on investment for farmers...
Stepping Motors Lecture 8 CSC 321: Embedded Sysytem First Semeter 2018/2019 The 27BJY 48 stepper motor and its ULN 2803 driver module A lecture on youtube There...
UCC Course 2018 Web Preferences The following settings are web preferences of the UCC Course 2018 web. These preferences override the site level preferences...
Assignment: Buzzer and RGB LED: Exercise 1 Write a program for the passive buzzer to buzz using the skeleton below. define pin number int main(void){ initialize...
Stepping Motor Exercises Goal: A stepping motor is a device which is often used when a precise amount of movement is required: an exact angle of a an exact position...
Exercise 6 Measuring Temperature and Humidity Goal: The DHT11 is a low lost humidity and temperature sensor using its own serial protocol for data transfer...
Statistics for UCC Course 2018 Web Month: Topic views: Topic saves: File uploads: Most popular topic views: Top viewers: Top contributors...
DHT11 Temperature and Humidity Sensor CSC321: Embedded Systems First Semester 2018/2019 A single GPIO pin We have seen how we can drive an LED from a single GPIO...
DHT11 Temperature and Humidity Sensor CSC321: Embedded Systems First Semester 2018/2019 A single GPIO pin We have seen how we can drive an LED from a single GPIO...
Exercises 5: First Hardware Exercise: The LED Goal: Now that we know how to program the Raspberry Pi we will start to setup our first electronic circuits, albeit...
Solutions to exercise 4: The Raspberry Pi Most of the exercises refer to exercises we have done in the sessions before on the PC and there are therefore no further...
Solutions to exercise 3: Development tools Exercise 3.1: A Makefile for the `Hello World!` program For the simplest possible C program let`s write the simplest possible...
Exercises 3 Development Tools Goal: This exercise session should get you acquainted with the tools we will use for editing, compiling, running and debugging programs...
Development Tools CSC321: Embedded Systems First Semester 2018/2019 The Development Cycle In software engineering, a software development cycle is the process...
Exercises 2: C Programming Goal: We will program most of our sensor readout programs in the C programming language and programming a few simple C programs will help...
A Motion Dectection System Motion Detection using PIR motion sensor and SIM 900 GSM module. Focusing on security, the project is a small sized detection system that...
Introduction to C programming Lecture 3 CSC321: Embedded Systems First Semester 2018/2019 Programming Languages A programming language is a vocabulary and set...
Title Article text. Comments My first c programming is very awesome
Solutions to exercise session 1 Solutions to the calculations: 101 001 110 0516 (octal) 334 (decimal) 0x14e (hexadecimal) 07 05 014 (all numbers in octal...
Exercises 1: Discovering Linux Goal: Today...
The Linux Operating System Lecture 2 CSC 321: Embedded Sysytem First Semester 2018/2019 Starting the Linux System This is how the screen for ubuntu 18.04 may look...
CSC 321: Embedded Systems University of Cape Coast 2018/2019 Academic Year, Semester One Lecture 1 Outline: Introduction of Lecturers Isaac Armah Mensah...
Open Day Projects The annual Open Day programme ahead of the 51st Congregation will be held on 24th September 2018 at the forecourt of the Sam Jonah Library of the...
AUTOMATIC WATER LEVEL CONTROLLER This project provides automatic water level controller where the system will automatically; monitor water level of an underground...

«Previous   1  2   Next»

Show 10, 20, 50, 100, 500, 1000 results per page, or show all.

Related topics: RSS feed, rounded corners RSS feed, ATOM feed, WebNotify, site changes, site map

Topic revision: r1 - 2006-11-15 - TWikiContributor
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback