(r14) REPLAndStandardPythonProgramming < IoT_Course

Tags: view all tags

<p align="center"><font face="Liberation Sans, sans-serif"><font size="6"> *Course on Internet of Things* </font></font></p>
---+ Exercises Session 1:
---++ Introductory remarks:

The scripts we are going to develop during this exercise session do not depend on any system issues: We do not use command line arguments not available in !MicroPython nor do we use any hardware specific features which are not available on a PC. The exercises can therefore be developed and run on the ESP32 but also on any standard PC with Python3 installed.
---++ Exercise 1: Use of REPL

Connect to your ESP32 with minicom or thonny. You may try the same thing running Python3 on your PC.

Using REPL:
   * <p>print “Hello World!”</p>
   * <p>read in a text using <i>input() </i>and print it</p>
   * <p>Calculate</p> <p><img align="middle" alt="calculations.png" height="52" src="%PUBURL%/UCC_Course_2021/Exercises/calculations.png" title="calculations.png" width="142" /></p>
   * <p>Calculate sin(30°) <br /> If you see errors, how do you correct them? Are the results correct?</p>
   * Finally make the "print Hello World!" command a script and execute it.
---++ Exercise 2: A simple calculator

Write a script that assigns the values 5 and 3 to the variables a and b respectively

Print the results of 4 basic arithmetic operations:
   * <p>a+b</p>
   * <p>a-b</p>
   * <p>a*b</p>
   * <p>a/b</p>
If you use integer format when printing the result, you will see the result truncated to an integer. Can you correct changing the format?

%ATTACHURL%/calculatorV1.py.txt

Improve this program asking the user to enter 2 real numbers (floats) separated by a space. This is how it should look like:

<img alt="calcOk.png" height="172" src="%ATTACHURL%/calcOk.png" title="calcOk.png" width="845" />

If this happens:

<img alt="invalidFloat.png" height="240" src="%ATTACHURL%/invalidFloat.png" title="invalidFloat.png" width="822" />

when the user mistypes and enters something that is not a real number, can you capture the error and simply ask the user to repeat his input, until you get 2 correct floating point numbers?

%ATTACHURL%/calculatorV2.py.txt

*Bonus points:* Writing a parser for user input is rather easy if the numbers and operator are separated by spaces (have a look at the split method of strings). It is quite a bit more tricky if you allow entering calculations without spaces between the operands and the operator. Can you write a parser accomplishing this?

Hint: A very elegant solution to this is the use of regular expressions and Python provides a module helping you with this:

https://docs.micropython.org/en/latest/library/ure.html

A float is defined as follows:
   * <p>zero or more spaces</p>
   * followed by one '+' or one '-'
   * followed by
      * a ‘.’ followed by at least one digit
   * or<br />
      * at least one digit followed by zero or one ‘.’ followed by zero or more digits
   * <p>followed be zero of more spaces</p>
Try your parser on this input:
| *Input* | *ok or not ok* |
| 5.3+4.7 | ok |
| 5.3++4.7 | not ok |
| 5..3 + 4.7 | not ok |
| .3+.7 | ok |
| 5.3+4b7 | not ok |
| empty string | not ok |
| 5.3+. | not ok |
| 5.3+ | not ok |
| -1--1 | ok |
| --1--1 | not ok |
Try also several spaces in between operands and operator.

%ATTACHURL%/calculatorV3.py.txt
---++ Exercise 3: Conditions

Like in exercise2, start with 2 numbers a,b with values 5 and 7. In your program check which of the 2 numbers is bigger and print the result.

Then improve the program asking the user for 2 integer numbers. Make sure he enters 2 correct numbers and capture possible errors. This is a typical output:

<img alt="conditions.png" height="188" src="%ATTACHURL%/conditions.png" title="conditions.png" width="649" />
---++ Exercise 4: The Fibonacci series

The Fibonacci number series is defined as:

F(0) = 0; F(1) = 1

F(n) = F(n-1) + F(n-2)<br /><br />
   * Calculate and print out the Fibonacci numbers up to F(n). Get n from the user where n &gt;= 0
Try your program for n=0, n=1, n=2, n=3, n=20<br /><br />
   * Ask the user up to which is the maximum number up to which you should calculate.
---++ Exercise 5: A bit of Mathematics: Calculate the sine function

Write a script that asks the user for an angle in degrees. Calculate the sine of this angle.
---++ Exercise 6: Classes

Write a Python class with methods calculating mathematical number series. These series should be calculated:
   * The Fibonacci numbers up to F(n). n is passed as parameter to the method
   * The Fibonacci numbers smaller than max. max is passed as parameter to the method
   * The prime numbers up to max
   * Factorial:<br /><img alt="factorial.png" height="41" src="%ATTACHURL%/factorial.png" title="factorial.png" width="308" />
   * The geometric number series:<br /><img alt="geometric.png" height="72" src="%ATTACHURL%/geometric.png" title="geometric.png" width="335" />
   * The harmonic number series:<br /><img alt="harmonic.png" height="72" src="%ATTACHURL%/harmonic.png" title="harmonic.png" width="76" />
 <br />Can you tell what the following series calculate?
| <img alt="ln2.png" height="74" src="%ATTACHURL%/ln2.png" title="ln2.png" width="117" /> | <img alt="pi.png" height="74" src="%ATTACHURL%/pi.png" title="pi.png" width="141" /> | <p> </p> <p><img alt="wallis1.png" height="39" src="%ATTACHURL%/wallis1.png" title="wallis1.png" width="280" /></p> | <img alt="e.png" height="70" src="%ATTACHURL%/e.png" title="e.png" width="94" /> |
Add these series to your class and try. Write a test script exercising the different methods.

In order to make this exercise run on the ESP32 you must first upload your mathSeries.py module implementing the !MathSeries class into the file system of the ESP32. Create a directory called _lib_ on the ESP32 file system and put your module there:

_ampy mkdir /lib_

_ampy put mathSeries.py /lib/mathSeries.py_

Once this is done, go to the REPL window of thonny and

_import mathSeries_

You can now create an instance of the !MathSeries class:

_series = mathSeries.MathSeries()_

When running on a PC you may want to plot the series as well. If you don't know how to plot data in Python, you will find all the information needed here:<br /> https://matplotlib.org/3.2.1/index.html

Here is the exercise sheet in odt format:

%ATTACHURL%/exercise_1.odt

-- %USERSIG{UliRaich - 2020-05-03}%

---++ Comments

%COMMENT%

Attachments

Topic attachments
I	Attachment	History	Action	Size	Date	Who
png	calcOk.png	r1	manage	21.7 K	2020-05-03 - 19:52	UliRaich
txt	calculatorV1.py.txt	r1	manage	0.4 K	2020-05-28 - 09:34	UliRaich
txt	calculatorV2.py.txt	r1	manage	1.3 K	2020-05-28 - 09:34	UliRaich
txt	calculatorV3.py.txt	r1	manage	3.2 K	2020-05-28 - 09:34	UliRaich
png	conditions.png	r1	manage	28.8 K	2020-05-03 - 20:25	UliRaich
png	conversionError.png	r1	manage	19.3 K	2020-05-03 - 19:42	UliRaich
png	e.png	r1	manage	1.9 K	2020-05-04 - 12:56	UliRaich
odt	exercise_1.odt	r1	manage	132.6 K	2020-08-09 - 08:25	UliRaich
png	factorial.png	r1	manage	2.8 K	2020-05-04 - 12:48	UliRaich
png	geometric.png	r1	manage	3.9 K	2020-05-04 - 12:48	UliRaich
png	harmonic.png	r1	manage	1.6 K	2020-05-04 - 12:53	UliRaich
png	invalidFloat.png	r1	manage	32.0 K	2020-05-08 - 13:38	UliRaich
png	ln2.png	r1	manage	2.0 K	2020-05-04 - 12:48	UliRaich
png	pi.png	r1	manage	2.7 K	2020-05-04 - 12:48	UliRaich
png	wallis.png	r1	manage	6.1 K	2020-05-05 - 14:31	UliRaich
png	wallis1.png	r1	manage	14.8 K	2020-05-05 - 14:35	UliRaich

Topic revision: r14 - 2021-06-26 - UliRaich