Sensors with serial interface There are 2 sensors with analogue to digital conversion already implemented with the chip: the DS18B20 digital thermometer from...
Sensor Kit The sensor kit contains 37 different types of sensors and actuators. For most of these one can find example applications in either the wiringpi of the pigpio...
Interfacing Scilab to the Raspberry Pi or the Arduino Introduction Scilab is a system for open source program for numerical mathematics quite similar to Matlab even...
Rotary Encoder The rotary encoder can be considered as 2 switches which periodically open and close as you turn the encoder shaft. It can be used e.g. to change the...
The Robot The robot consists of a 3 wheel chassis where 2 wheels are driven by DC motors. It is controlled by an Arduino Uno and contains an ultrasonic distance...
Report of Ultrasonic Distance Measurement Project The Arduino is a small intelligent integrated circuit board with its brain (processor) as the ATMEGA microcontroller...
Arduino Project Report on Servo Motor This report covers all that has been done from the beginning. An Arduino is an open source electronics prototyping platform based...
The Realtime Clock Goal: The real time clock and eeprom module uses the real time clock chip which can be programmed using its I2C bus interface. The pigpio library...
The Raspberry Pi Introduction The Raspberry Pi is a small computer powerful enough to run a full blown operating system like Linux. The 3rd version of this machine...