Backlinks to I2C in Embedded_Systems Web (Search all webs)
Results from Embedded_Systems web retrieved at 14:59 (GMT)
Accelerometers Introduction Accelerometers are used in many portable devices like smart phones, to detect if the device is held vertically or horizontally, in fitness...
The ADS1115 16 bit ADC The ADS1115 from Texas Instruments is a high precision I2C controlled Delta Sigma ADC. In addition to the ADC itself which provides 2 differential...
A meteorological station. We have 2 PCBs in our sensor collection for use in a meteorological station: The BMP180 atmospheric pressure sensor, which can also measure...
Analogue to Digital Conversion (ADC) Goal: Apart from the digital to analogue converter where we created analog signal levels from digital values, we have only handled...
The BMP180 Temperature and Atmospheric Pressure Sensor The BMP180 is a sensor that measures temperature to 0.1 ...
Exercise List Here is a list of exercises to be solved during the course on emdedded systems. First we play on the Linux system installed on the PC, then we write...
I2C Real Time Clock and serial EEPROM While our Raspberry Pi is usually connected to the network from which it can get date and time, other micro controllers (the...
The mcp4725 Digital to Analogue Converter Goal: The digital to analogue converter is a device very often used in control applications. Some HV power supplies are...
The 2 line LCD display. A 2 line LCD display can be used to display simple information. When using an ADC to read voltages it can be used to show the results implementing...
The Hantek 6022BE Digital Storage Oscilloscope For the course on embedded systems we need an oscilloscope to be able to see certain signals created by micro controller...
Exercise 15: EEPROM and Driver Access Goal: The goal of this exercise is twofold: First we will learn about an EEPROM, a Electrically Erasable Read Only Memory. These...
Exercise 11: The LCD Display Goal: The main goal of this exercise is to prepare for an exercises on Analogue to Digital Conversion (ADC). In the ADC exercise we will...
Digital to Analogue Conversion Digital to Analogue Conversion: the mcp4275 Lecture 10Uli RaichUCC semester 2017/2018 Analogue versus digital Up to now we only treated...
The 2 Line LCD Display and its HD44780 Controller The 2 Line LCD Display and its HD44780 Controller Uli Raich UCC semester 2017/2018 Why a simple 2 line display...
Analogue to Digital Conversion Analogue to Digital Conversion Lecture 12 Uli Raich UCC semester 2017/2017 Analogue to Digital Conversion Printed Circuit Boards In...
The Raspberry Pi and how to bring it to life Lecture 6Uli RaichUCC semester 2017/2018 A first glimpse There are several versions of Raspberry Pis available on the...
Accessing the Real World Lecture 7 Uli Raich UCC semester 2017/2018 Access libraries As we have already seen, the Raspberry Pi flat cable connector and the cobbler...
Stepping Motors Lecture 9 Uli Raich UCC semester 2017/2018 The 27BJY 48 stepper motor and its ULN 2803 driver module A lecture on youtube There is an excellent...
Exercises 5: First Exercise on Hardware: LEDs Goal: Now that we know how to program the Raspberry Pi we will start to setup our first electronic circuits, albeit...
The MCP4725 Digital to Analogue converter Often we need analogue signal levels or synthetically produced (program controlled) signals to drive external devices. The...
Additional Sensors The sensor kit was originally designed to be used with the Arduino, an Italian micro controller design very popular with hobbyists. The Arduino...
Analogue to Digital and Digital to Analogue Conversion The PCF8591 is a 4 channel analogue to digital (ADC) and 1 channel digital to analogue converter (DAC). ADC...
Mid Semester Quiz Embedded Systems course General remarks: In the following quiz more than one answer may be correct or all of the answers may be wrong. Linux commands...
Exercises 4: The Raspberry Pi Goal: The Raspberry Pi in contrast to the PC uses and ARM processor and peripherals are not included in the system but are connected...
The Raspberry Pi Introduction The Raspberry Pi is a small computer powerful enough to run a full blown operating system like Linux. The 3rd version of this machine...
The Realtime Clock Goal: The real time clock and eeprom module uses the real time clock chip which can be programmed using its I2C bus interface. The pigpio library...
Solutions to the exercises This is the page to which the solutions will be uploaded. These will mainly consist of gzipped tar files which you can download and unpack...
Exercise 12: The BMP180 temperature and barometric pressure sensor Goal: The BMP180 is an I2C chip allowing to measure temperature to a precision of 0.1 ...
Statistics for Embedded Systems Web Month: Topic views: Topic saves: File uploads: Most popular topic views: Top viewers: Top contributors...
Number of topics: 29
Site map
AFNOG web
Create New Topic
Index
Search
Changes
Notifications
RSS Feed
Statistics
Preferences
Account 
Copyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors. Ideas, requests, problems regarding TWiki? Send feedback